Victron MultiPlus-II 3000VA 120V ONLY 12V, 24V & 48V models


Select MultiPlus-II 120V Model: 12V 3000VA 120V ONLY
Price:
Sale price$1,380.40
Stock:
In stock

Pickup available at Stockbridge, GA - Warehouse

Usually ready in 24 hours

Description

Need Advice or a Special Discount Offer for Your Project?

Contact us: 1-800-547-3050 or Support@18650batterystore.com

 

DOWNLOADS

Victron Energy 3000VA MultiPlus-II 3000VA 120 ONLY Datasheet
Victron Energy 3000VA MultiPlus-II 3000VA 120 ONLY Manual
MultiPlus/Quattro Generator FAQ


Victron Energy 3000VA MultiPlus-II 120V ONLY, these are NOT the 2 x 120 models that have a four wire input. The 120/240 models that put on 2 legs of 120V can be  found in our other offering.  Please make sure you are ordering the correct model, please call and ask if you are unsure. A 15% restocking fee will be assessed on all returned units.

Part Numbers:
12V 3000VA 120V ONLY: PMP122305120
24V 3000VA 120V ONLY: PMP242305100
48V 3000VA 120V ONLY: PMP482305100

 

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.

 

PowerControl and PowerAssist – Boosting the capacity of the grid or a generator
A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.

 

ESS: Energy Storage Systems
The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual.

 

Solar energy: AC power available even during a grid failure
The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.

 

Two AC Outputs
The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.

 

On-site system configuring, monitoring and control
Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.

 

Remote configuring and monitoring
Install a Color Control GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.


Recently viewed