Victron Phoenix Inverter with VE.Direct NEMA 5-15R - 12V, 24V, 48V

Phoenix Inverter with VE.Direct: 12V 250VA
Sale price$102.00
In stock

Pickup available at Stockbridge, GA - Warehouse

Usually ready in 24 hours


Need Advice or a Special Discount Offer for Your Project?

Contact us: 1-800-547-3050 or


Victron Phoenix Inverter with VE.Direct NEMA 5-15R

12V, 24V, or 48V

250, 375, 500, 800, 1200 VA Inverter

Victron Phoenix Inverters with VE.Direct Part Numbers:
PIN122510500 – 12V 250VA
PIN123750500 – 12V 375VA
PIN125010500 – 12V 500VA
PIN121800500 – 12V 800VA
PIN122120500 – 12V 1200VA
PIN242510500 – 24V 250VA
PIN243750500 – 24V 375VA
PIN245010500 – 24V 500VA
PIN241800500 – 24V 800VA
PIN242120500 – 24V 1200VA
PIN482510500 – 48V 250VA
PIN483750500 – 48V 375VA
PIN485010500 – 48V 500VA
PIN481800500 – 48V 800VA
PIN482120500 – 48V 1200VA


Victron inverter

Highly Reliable - built for the years ahead

Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.

Full bursts - High Peak output

Some electronic devices - particularly those which have an electric motor - require short burst of energy on start-up which is much higher than their rated power consumption. No problem - the Phoenix inverter has industry-leading peak-power capability.

Intelligent alarms, shut-downs, and re-starts

A high power draw on start-up can trigger false alarms, and shut-downs. Phoenix makes allowance for this and only shuts down in cases of persistent overload. Intelligently - shut downs will be followed by a series of re-starts - to eliminate 'false alarms'.

Conserve power with Eco mode

In Eco mode the inverter shuts down when no power is required. Phoenix senses the output socket every couple of seconds and automatically turns back on if power is again required.

User-configurable settings

Phoenix has a communication port providing access to status information, alarms and automatic user-configurable low-voltage shut downs. Shut downs will be followed by a series of intelligent re-start attempts. User settings can be accessed from your computer or mobile device via VictronConnect - our free-to-use app.

VE.Direct communication port
The VE.Direct port can be connected to:

  • A computer (VE.Direct to USB interface cable needed)
  • Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

  • Low battery voltage alarm trip and reset levels
  • Low battery voltage cut-off and restart levels
  • Dynamic cut-off: load dependent cut-off level
  • Output voltage 120V
  • Frequency 50 Hz or 60 Hz
  • ECO mode on/off and ECO mode sense level


  • In- and output voltage, % load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in stand by the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/of

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

LED diagnosis

Please see manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.

Available with different output sockets

  • Schuko
  • UK
  • AU/NZ
  • IEC-320 (male plug included)
  • Nema 5-15R

DC connection with screw terminals

No special tools needed for installation.

More information:

Recently viewed